Acer Nitro 5 completely dead - No lights, nothing happening

AcerNitro 5power issuetroubleshootingdead laptop

Registration:
11.12.2024
Messages: 447

Flash_007 Topic author

29.01.2025 21:49

I'm having a major issue with my Nitro 5. It was working fine yesterday, but today it won't power on at all. I've already tried the basic stuff: checking the power cord, using a different outlet, and even trying a different charger brick just in case. When I press the power button, absolutely nothing happens; no lights, no fan noise, nothing on the screen. I even tried a hard reset by holding the power button for 30 seconds, but it remains completely unresponsive. Has anyone else had this specific model suddenly die like this? Any advice on what internal components I should check?

15 Answers

25.01.2024
Posts: 798

AtariRetro

20.04.2025 21:11

Have you checked the DC jack itself? Sometimes the internal connection point gets loose or damaged, even if the charger seems fine.

15.06.2024
Posts: 367

CyberPunk

16.05.2025 12:39

This sounds like a power delivery issue, not necessarily a component failure. Before opening it up, try a dedicated external power supply tester if you have one. It can tell you if the PSU is outputting the correct voltage under load.

19.05.2022
Posts: 448

ElectricSoul

10.06.2025 15:15

Short. Try the battery.

19.06.2021
Posts: 1305

LogiPro

20.06.2025 03:57

I had this exact problem on my Nitro 5 last year. It was the motherboard's power rail that failed. You really need a multimeter to test the voltages at the main power input points. It's not always the charger.

22.10.2023
Posts: 1150

Cole_C

05.07.2025 06:35

Did you try removing the RAM sticks and reseating them? Sometimes a bad connection there can prevent the system from initializing and showing any signs of life.

13.11.2021
Posts: 129

VaultTec in response

20.07.2025 17:38

Wait, if you tried a different charger brick, did you verify that the wattage and voltage output are identical to the original specs? Some bricks look right but are underpowered, which can cause a complete shutdown.

26.01.2025
Posts: 870

RootAccess

25.07.2025 08:55

If the hard reset didn't work, the next logical step is to check the internal fuses. There are usually a few fuses near the power input that can blow if there was a power surge. You'll need to open the case to inspect those.

03.06.2024
Posts: 466

Hudson_W

11.08.2025 06:09

The power button itself could be faulty. It's a simple switch, but if it's making poor contact, the system will think nothing is happening even if the rest of the hardware is fine. Check the ribbon cable connection for the power button.

20.02.2023
Posts: 836

Burke_C

03.10.2025 19:07

I think you should look into the charging circuit board. The laptop might be getting power to the chassis, but the circuit responsible for managing that power and delivering it to the CPU/motherboard is fried. This is a common failure point.

14.05.2023
Posts: 50

Legend_C in response

29.10.2025 10:50

I agree with the fuse check. But also check the DC-in jack itself. Sometimes the jack gets damaged internally and only allows partial contact, preventing full power flow.

23.03.2023
Posts: 1309

Xenomorph_X

07.11.2025 08:37

How old is the laptop? Sometimes, after a few years, the internal capacitors degrade and fail to hold or deliver consistent power, leading to a sudden, complete failure like this.

06.09.2024
Posts: 8

TechGuru

10.01.2026 14:07

If you can get access to a multimeter, measure the voltage at the main power input connector while attempting to power it on. If you read 0V, the problem is definitely external or at the very first point of entry.

19.04.2022
Posts: 1210

DoomGuy

18.02.2026 04:58

I recommend taking it to a professional repair shop. Dealing with motherboard power rails and fuses requires specialized knowledge and tools. You might accidentally cause more damage trying to diagnose it yourself.

20.08.2024
Posts: 1107

RootAccess

25.02.2026 10:26

Has the laptop ever been dropped or subjected to liquid damage? Sometimes internal damage from a physical shock can cause a complete power failure that isn't visible.

28.06.2025
Posts: 495

Rosenthal_C

06.04.2026 18:07

Check the BIOS/UEFI settings if you can get it to show anything. If it's completely dead, though, the issue is pre-boot. Focus on the power path: Charger -> Jack -> Power Rail -> Motherboard.

Want to join the discussion?

To leave a comment, you must log in to the forum.